This device is fabricated using LinCMOS™ technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 V to 18 V. Each device features extremely high input impedance (typically greater than 1012 ohms), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships. The TLC372CP has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance. The TLC372CP is characterized for operation from 0°C to 70°C.
Single or Dual-Supply Operation
Wide Range of Supply Voltages 2 V to 18 V
Low Supply Current Drain 150 µA Typ at 5 V
Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
Built-in ESD Protection
High Input Impedance . . . 1012 ohms Typ
Extremely Low Input Bias Current 5 pA Typ
Ultrastable Low Input Offset Voltage
Input Offset Voltage Change at Worst-Case
Input Conditions Typically 0.23 µV/Month, Including the First 30 Days
Common-Mode Input Voltage Range Includes Ground
Output Compatible With TTL, MOS, and CMOS
Pin-Compatible With LM393
8 pin DIP. Manufactured by Texas Instruments.